 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MAAP-007649-000100 Ultra Linear 2W Power Amplifier 800 to 1000 MHz Features * * * * * * * * * Rev. V3 Product Image HIGH Gain: 19 dB (TYP.) HIGH P1dB: +34.0 dBm (TYP.) HIGH OIP3: +49.5 dBm (TYP.) 50% PAE @ P1dB Optimized Performance for RFID Bands >1 watt Dense Reader Mode Spectral Mask Compliance On-Chip Active Bias Network Lead Free 4 mm PQFN Surface Mount Package Functional Block Diagram 260oC Reflow Capability Applications * * * * RFID Readers Cellular Infrastructure AMPS, ISM Applications Multi-Carrier Applications Description M/A-COM's MAAP-007649-000100 2 watt power amplifier utilizes GaAs HBT technology with a +20 Volt BVceo process for improved linearity performance, power efficiency, and high reliability, in a low cost 4 mm PQFN surface mount plastic package. The MAAP-007649-000100 incorporates an on-chip active bias network for ease of implementation, and maintains high linearity over temperature. The device operates from a single +7.5 volt supply and has a +4.5 volt reference pin for power down control capability. The MAAP-007649-000100 has been optimized as a power amplifier for RFID Reader applications, but can also be used for infrastructure and industrial applications, since it provides consistent performance over the entire 800 to 1000 MHz band. Pin Configuration Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Function VB OUT RF INPUT RF INPUT RF INPUT No Connection or GND No Connection or GND No Connection or GND No Connection or GND RF Output / VCC RF Output / VCC RF Output / VCC RF Output / VCC VCCB VCONT B VCONT A N/C GND Description Output for base bias to PA device from on-chip bias circuit. See schematic. RF Input Signal RF Input Signal RF Input Signal No Connection. GND preferred No Connection. GND preferred No Connection. GND preferred No Connection. GND preferred RF Output & VCC Supply Input RF Output & VCC Supply Input RF Output & VCC Supply Input RF Output & VCC Supply Input VCC supply to Bias Circuit Control Input. Normally not connected. May be used only when the external bias setting resistor option is desired. Control Input to PA when on-chip bias setting resistor Is used. Recommended normal operation with VCONT = +4.4 V. No Connection. GND preferred RF/DC GND and thermal path to PCB vias. Sufficient vias must be provided for thermal considerations. See PCB layout. Ordering Information1 Part Number MAAP-007649-000100 MAAP-007649-0001A1 MAAP-007649-0001A2 Package 4 mm 16 lead PQFN Sample Application Kit (860 to 930 MHz) Sample Application Kit (960 MHz) Pkg. Base 1. Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-007649-000100 Ultra Linear 2W Power Amplifier 800 to 1000 MHz Electrical Specifications1 (Tc= +25oC, VCONT= 4.4 V, VCC = 7.5 V, Z0 = 50 , CW) Parameter Frequency Range Gain Gain Variation Input Return Loss Output Return Loss Output P1dB PAE Output IP3 (2 Tone, F = 1MHz) 2 Rev. V3 Test Conditions 860 to 930 MHz Band 960 MHz Band Over Temp = -40 C to +85 C 860 to 930 MHz Band 960 MHz Band 860 to 960 Band 860 to 960 Band 860 to 960 Band @ P1dB Pout = +20 dBm / tone, 860 to 960 MHz Pout = +27 dBm / tone, 860 to 960 MHz Pout for DRM3 Mask compliance @ Pout = 28 to 30 dBm VCC VCONT VCONT Power Amp ON Power Amp OFF o o Units MHz dB dB dB dB dB dB dBm % dBm dBm dBm dBc V V V mA mA % Min 800 Typ 19.5 19 1.3 Max 1000 -10 -10 -8 33 46 47 43 -15 -15 -11 34 50 49 44.5 30.7 -48 7.5 8.5 4.7 2 540 8 3 No Permanent Damage 590 10 6 Spectral Linearity Harmonics Bias Supply Control Voltage Bias Current Current Variation Ruggedness 4.1 4.4 Quiescent Current Iccq Control current Icont - 10 C to +70 C, @ Pout= +31 dBm Load VSWR 8:1 max., 0 to 360 Phase, Pout < 31 dBm , ZL = 50 o o o o o Thermal Resistance jc5 Junction Temperature Rise Above Baseplate Tjc5 1. C/W o 16.6oC/W 68oC C 2. 3. 4. 5. All data is based on the Evaluation Circuit Board (page 6), which is tuned specifically for 860 to 960 MHz (RFID Band), and is attached to a solid metal base for heat sinking. NOTE: Improper heat sinking can degrade performance. The device is capable of operating from 800 to 1000 MHz, with an optimized I/O match over narrow bands. DRM Mask: EPC Global Class 1 Generation Dense Reader Mode Spectral Mask. Caution: Operation beyond Absolute Maximum Ratings can degrade performance or cause permanent damage. Heat dissipates through several layers between the transistor junctions and metal baseplate. The PQFN packaged assembly (HBT MMIC die / conductive epoxy / metal slug interface) is mounted to the application circuit board using SN63 solder. The metal vias in the circuit board dissipate heat to the baseplate. Absolute Maximum Ratings4 Parameter RF Input Power Supply Voltage VCC Control Voltage VCONT Supply Current with RF Drive Supply Current without RF Drive Load VSWR Duty Cycle with Heat Sink Block Duty Cycle without Heat Sink Block Operating Temperature Storage Temperature Device Junction Temperature TJ, max o Absolute Maximum +18 dBm 8.5 V 5V 800 mA 600 mA 8:1 100% 50% -40 C to +85o C -65oC to +150o C 150oC Operating the MAAP-007649-000100 The MAAM-007649-000100 can be damaged by electrostatic discharge (ESD). Use proper ESD control techniques when handling this device. To operate the MAAP-007649-000100, follow these steps: 1.) Connect the 50 ohm load 2.) Apply VCC (+7.5 Vdc) 3.) Apply VCONT (+4.4 Vdc) 4.) Set the Input Power Level (Pin) 5.) Turn off in reverse order 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-007649-000100 Ultra Linear 2W Power Amplifier 800 to 1000 MHz Rev. V3 Typical Performance Curves at +25C (Vcont = 4.4V @ 7 mA, VCC = 7.5V @ Icq = 540 mA) Gain vs Frequency (860 & 915 Band) 21 20 Gain (dB) Gain (dB) Gain (dB) Gain (dB) + 25 C + 85 C - 40 C Gain vs Frequency (960 Band) 21 20 19 18 17 16 + 25 C + 85 C - 40 C 19 18 17 16 15 0.8 0.84 0.88 0.92 0.96 1 0.8 0.84 0.88 0.92 0.96 1 Frequency (GHz) Frequency (GHz) Input Return Loss vs Frequency (860 & 915 Band) 0 Return Loss (dB) Return Loss (dB) Input Return Loss vs Frequency (960 Band) 0 Return Loss (dB) Return Loss (dB) -5 -10 -15 -20 + 25 C + 85 C - 40 C -5 -10 -15 -20 0.8 + 25 C + 85 C - 40 C 0.84 0.88 0.92 0.96 1 0.8 0.84 0.88 0.92 0.96 1 Frequency (GHz) Frequency (GHz) Output Return Loss vs Frequency (860 & 915 Band) 0 Return Loss (dB) Return Loss (dB) Return Loss (dB) Return Loss (dB) Output Return Loss vs Frequency ( 960 Band) 0 -5 -10 -15 -20 + 25 C + 85 C - 40 C -5 -10 -15 -20 0.8 + 25 C + 85 C - 40 C 0.84 0.88 0.92 0.96 1 0.8 0.84 0.88 0.92 0.96 1 Frequency (GHz) 3 Frequency (GHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-007649-000100 Ultra Linear 2W Power Amplifier 800 to 1000 MHz Rev. V3 Typical Performance Curves at +25C (Vcont = 4.4V @ 7 mA, VCC = 7.5V @ Icq = 540 mA) Isolation vs Frequency (860 & 915 Band) -25 Isolation (dB) Isolation (dB) Isolation vs Frequency (960 Band) -25 -30 -35 -40 -45 -35 -40 -45 0.8 0.84 0.88 0.92 0.96 1 Frequency (GHz) Isolation (dB) Isolation (dB) -30 + 25 C + 85 C - 40 C + 25 C + 85 C - 40 C 0.8 0.84 0.88 0.92 0.96 1 Frequency (GHz) P-1dB vs Frequency (RFID Band) Vcont=4.15V, 7 mA, VCC=7.5V, Icq=515mA 36 35 34 33 32 0.86 + 25 C + 85 C - 40 C PAE vs Frequency @ P-1dB (RFID Band) Vcont=4.15V, 7 mA, VCC=7.5V, Icq=515 mA 58 55 PAE (%) PAE (%) + 25 C + 85 C - 40 C P1dB (dBm) P-1dB (dBm) 52 49 46 0.86 0.88 0.9 0.92 0.94 0.96 0.88 0.9 0.92 0.94 0.96 Frequency (GHz) Frequency (GHz) Two-Tone IM3 vs Pout Vcont=4.15V, 7 mA, VCC=7.5V, Icq=515 mA, Freq = 915 MHz & 916 MHz Freq=915 MHz & 916 MHz -25 IM3IM3 (dBc) (dBc) -35 -45 -55 -65 20 22 24 26 28 30 Pout per tone (dBm) 4 Two-Tone IM5 vs Pout Vcont=4.15V, 7 mA, VCC=7.5V, Icq=515 mA, Freq = 915 MHz & 916 MHz Freq=915 MHz & 916 MHz -40 + 25 C + 85 C - 40 C + 25 C + 85 C - 40 C IM5 (dBc) IM5 (dBc) -50 -60 -70 20 22 24 26 28 30 Pout per tone (dBm) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-007649-000100 Ultra Linear 2W Power Amplifier 800 to 1000 MHz APPLICATION CIRCUIT SCHEMATIC ( Optimized for (Optimized Band) Application Circuit Schematic 860 to 960 MHz RFIDfor the 860 to 960 MHz RFID Band) Vcont = + 4.4 V Nominal (PA ON) +4.2 V to 5.2 V ( PA ON) Vcont = < 2 V ( PA OFF) Icont = 10mA nom. Rev. V3 Vcont C14 C=0.1 uF R1 R=0 Ohm C1 C=0.01 uF C4 C=1000 pF C5 C=1000 pF VCC= +7.5V , nom., 8.5V, max. Iccq= 515 mA, nom. R6 R=0 Ohm C8 C=100 pF C3 C=1000 pF C11 C=4.7 uF 15V RATING R5 R=200 Ohm C7 C=100 pF L1 L=3.3 nH R= R3 R=0 Ohm R2 R=0 Ohm R4 R=open VCC 16 15 14 13 V CO N T A 1 2 C9 C=18 pF L3 L=1.0 nH R= C15 C=12 pF 3 4 V CC B N/C N /C L2 L=24 nH R= RFO4 RFO3 RFO2 RFO1 12 11 10 9 L5 L=2.2 nH R= C12 C=6.8 pF C10 C=100 pF RFOUT VBOUT RFIN2 RFIN3 RFIN4 4mm PQFN 16-L PKG RFIN G ND 1 G ND 2 6 G ND 3 7 Evaluation Circuit Board Bill of Material 860 to 930 MHz RFID Band COMPONENT PCB R1 R2,R3 R5 R6 C15 C7,C8 C3,C4,C5 C1 C10 C9 C14 C11 C12 L3 L5 L1 L2 J1,J2 U1 J3 5 8 G ND 4 960 MHz RFID Band PART NO. SAME SAME SAME SAME SAME Location 30 mil left of that shown for 860 to 930 Band SAME SAME SAME SAME SAME SAME SAME SAME Replace with 0 ohm jumper SAME SAME SAME SAME MAAP-007649 SAME 000 ohm 000 ohm 200 ohm 000 ohm 12pF 100pF 1000pF 0.01uF 100pF 18pF 0.1uF 4.7uF 6.8pF 1nH 2.2nH 3.3nH 24nH RF CONN 4mmPQFN16L DC CONN PART NO. 1000028265 RK73Z1JTTD(0603) RK73Z1ETTP(0402) RK73B1ETTP201J RK73Z1ETTP(0402) NPO0402HTTP120J NPO0402HTTP101J X7R0402HTTP102K X7R0402CTTP103K NPO0603HTTD101J NPO0603HTTD180J X7R0402CTTP104K Y5V0805ATTE475M NPO0402HTTP6R8D 0402CS-1N0XJL 0402CS-2N2XJL 0402CS-3N3XJLU 0603CS-24NXJL 142-0711-881 MAAP-007649 TSM-105-01-S-DV VALUE SUGGESTED VENDOR TYCO KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA COILCRAFT COILCRAFT COILCRAFT COILCRAFT JOHNSON TYCO 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-007649-000100 Ultra Linear 2W Power Amplifier 800 to 1000 MHz Rev. V3 EVALUATION CIRCUIT BOARD LAYOUT1,2,3,4 (Optimized for the 860 to 960 MHz RFID Band) 1. FR-408, 4-Layer, Coplanar 50 Ohm Line: W = 19.0 mils, S = 10.0 mils, H = 10.0 mils. Total Board Thickness = 42.0 mils. Board Size: 2.0 x 1.5 inches. 2. Via Geometry for the 4 mm PQFN package backside needs to provide a low-inductance ground and low thermal resistance path to the PCB back side ground. Via Diameter: 8.0 mils finished size with 1.0 mils minimum plating. At least 25 vias are required for thermal considerations. Additional top side metallization connected to ground vias is also recommended. 3. Heat sinking using a solid metal block below the PCB is recommended for optimum CW operation. Improper heat sinking below the PCB may degrade RF performance and / or reliability. 4. Evaluation circuit board assemblies use SnPb (tin lead) soldering process to attach all components, and are therefore not RoHS compliant. 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAP-007649-000100 Ultra Linear 2W Power Amplifier 800 to 1000 MHz Lead-Free 4 mm 16-Lead PQFN Package Outline Dimensions Rev. V3 ZZZZ Dimensions are inches / millimeters 7 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MAAP-007649-000100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |